Tube-tech MMC 1A MIC Preamp and DI and multiband compressor Instrukcja Użytkownika Pobierz pdf (Strona 6)

Lydkraft ApS

Mose Allé 20, DK2610 Rødovre

Denmark

HIGH BAND:

1) Turn all the THRESHOLD-controls fully counter-clockwise.

2) Turn the HIGH BAND GAIN-control fully clockwise.

3) Turn the LOW BAND and MID BAND GAIN-control fully counter clockwise.

4) Set the X-OVER HIGH at 1,2k.

5) Apply a signal of 10 kHz, (approx. -20 dBU) to the input and adjust the input level

for an output reading of 0,0dBU.

6) Move the jumper on the high band side chain PCB (top most PCB) to “ADJUST”

and observe that the output level has dropped to -10,0 dBU.

7) If this is not the case, adjust the gain reduction with P61, to obtain a drop of -10,0 dB.

10) Adjust the high band display with P62 so the green -10 LED turns on and the

green -7 LED just turns off.

(041121)

1 2 3 4 5 6

Brak uwag

Tube-tech MMC 1A MIC Preamp and DI and multiband compressor Instrukcja Użytkownika Strona 6